http://WWW.LUTRONMETER.COM
INSTRUMENTSZONE 571b78d19ec66f109851c64a False 166 1273
OK
background image not found
Found results for
'ergonomic'
Fluke 77 IV Digital Multimeter INR   34700 INR  34700
-0%

Fluke 77 IV Digital Multimeter

Versatile meters for field service or bench repair. The Fluke 77 IV digital multimeter has the features needed to repair most electrical and electronic problems. This meter is simple to use and has significant improvements over Fluke's original 70 Series with more measurement functions, conformance to the latest safety standards, and a much larger display that's easier to view. It measures: · Wide 1000 V measurement range · Average responding AC measurements · 0.3% accuracy · 10 Amps continuous (20 A for 30 seconds) · Frequency and capacitance · Resistance and continuity Features · Large display · Backlight for work in dim areas · Min / Max to record signal fluctuations · Ergonomic overmolded housing with integrated probe holders · Free your hands with the optional TPAK magnetic hanger · Auto and Manual ranging · Meets Measurement Category 1000 V CAT III and Category IV 600 V safety standards

INR 34700 INR 34700

Availability:True

Pay mode:COD only

view details
Amprobe TIC 300 PRO High Voltage Detector INR   25100 INR  25100
-0%

Amprobe TIC 300 PRO High Voltage Detector

MODEL NO. TIC-300 PRO FEATURES:- Verifies presence of voltage from 30 VAC to 122,000 VAC (122kV ) without contacting the conductor Simple two level electricity tester provides: High voltage setting to check transmission lines, power distribution equipment, down power lines, fuses, and load break connectors Lower voltage setting to check for voltage in breaker panels, breakers, power outlets, and wiring VolTect™ alert warns that voltage is present with bright flashing lights and loud beeps Push button self-test verifies that tester is working properly Ergonomic design includes a convenient handle and a universal adapter for use with TIC 410A Hot Stick attachment Drop-proof to 6 feet (1.8m) Includes CC-300PRO carrying case, users manual and batteries (installed)

INR 25100 INR 25100

Availability:True

Pay mode:COD only

view details
Amprobe BAT-200 Battery Tester INR   800 INR  800
-0%

Amprobe BAT-200 Battery Tester

MODEL NO. BAT-200 FEATURES:- Easy-to-read color-coded display with “good,“low and “replace/recharge indicators Works with standard and rechargeable batteries Compatible with: 9V, AA, AAA, C, D, 1.5V button type Compact design Ergonomic battery holder Users manual included

INR 800 INR 800

Availability:True

Pay mode:COD only

view details
Amprobe TMA5 Mini Vane Anemometer INR   8400 INR  8400
-0%

Amprobe TMA5 Mini Vane Anemometer

MODEL NO. TMA5 FEATURES:- Pocket size, compact design Measures: air velocity, temperature, humidity, dew point, wet bulb, wind-chill and ambient temperature Selectable wind units: KNT (Knot), BF (Beaufort), ft/m (feet per minute), M/h (mile per hour), m/s (meter per second), km/h (kilometer per hour) Selectable temperature units °C or °F Max wind speed display Quick measurement response External temperature probe Easy, two-button operation Data hold Auto power off with disable feature Low battery indication Ergonomic design with a wrist strap

INR 8400 INR 8400

Availability:True

Pay mode:COD only

view details
Amprobe TX900 Microwave Leakage Detector INR   65500 INR  65500
-0%

Amprobe TX900 Microwave Leakage Detector

MODEL NO. TX900 FEATURE:- Measures for wave leakage and tests oven power 8 dipole sensors – allows detection of plane wave signals of any polarization Temperature compensation – accurate reading regardless of ambient temperature changes Compact, ergonomic design Low battery indication Analog Bar Graph Auto-zero Accessories supplied: Two 500 ml Plastic Beakers, Spirit

INR 65500 INR 65500

Availability:True

Pay mode:COD only

view details
FLUKE I50S, AC SCOPE CURRENT PROBE, 50MHZ INR   302200 INR  302200
-0%

FLUKE I50S, AC SCOPE CURRENT PROBE, 50MHZ

MODEL NO. i-50S · Designed for use with bench oscilloscopes, the i50s Current Probe offers an ergonomic, robust and high performing solution for the measurement of DC and AC currents up to 50 MHz. With a permanent nominal current of 30 A RMS and a measuring capacity of 50 A for 10 s, as well as exceptional immunity to high common mode voltages (dv/dt = 5 kV/_s,) amplitude = 1,5 kV, error < 0,05% of IPN), the i50s considerably widens the possibilities of accurate measurement of commutation currents. Bandwidth DC up to 50 MHz Nominal current 30 A Max. current 50 A, < 10 s Automatic zero adjustment and degauss functions Overheating and head unlocked warning Rise time < 7 ns External magnetic field rejection rate AC and DC 60 dB Rejection rate of fast dv/dt (5kV/_s) < 15 mA t Electrical Characteristics Nominal current (In) ± 30 A DC or A rms Measuring range (duration < 10 s) I max ±50 A pk Output sensitivity low range 1 V/A (1 MΩ) High range 100 mV/A (1 MΩ) Overall accuracy (DC to 100 Hz at 25°C ±0.5% at In typical ±1.5% at I max Gain variation (max) ±0.04% of rdg / °C Step response in Data Sheet Frequency response in Data Sheet Insertion impedance (ZI) in Data Sheet < 0.1 Ω up to 10 MHz < 0.4 Ω 10 MHz to 50 MHz External magnetic field rejection rate 60 dB (AC and DC) Rejection rate of fast dV/dt at 5 kV/ μs < 15 m At (during dV/dt) Output noise level (measured with a filter at 25 MHz) 1 m At rms typical Output noise level (measured with a filter at 25 MHz) 9 mA tpp Dynamic Characteristics Bandwidth DC to 50 MHz(-3dB) Frequency derating (see Figure 4) 10 A at 10 MHz Rise time, (10% to 90%) < 7 ns Delay time < 25 ns Overshoot < 5% of reading General Characteristics Aperture dimensions 5 x 5 mm (0.2 in x 0.2 in) Max primary conductor temp 60° C (140°F) Dielectric withstand 1350 Vrms / 50 Hz / 1 min Working voltage 300 Vrms or DC (CAT I) 150 Vrms or DC (CAT II) Operating temperature °C to + 40°C (32°F to 104°F) Storage temperature -10°C to + 60°C (14°F to 140°F) Maximum altitude 2000 m (6600 ft) Maximum relative humidity 80% , 31°C (87°F) Environment Indoor use only Power supply ±12 V ± 0.5 V Current consumptions at nominal 30 A 550 mA Current consumption during demagnetization 1.3 A (for 6 s) Probe Output cable length 2 m (6.6 ft)

INR 302200 INR 302200

Availability:True

Pay mode:COD only

view details
KUSAM-MECO KM-5490 OXYGEN ANALYSER INR   19750 INR  19750
-0%

KUSAM-MECO KM-5490 OXYGEN ANALYSER

MODEL NO. KM-5490 FEATURES • As it uses a high quality oxygen sensor, it is very precise and its performance is stable. • It uses the advance technology design and has multiple functions. • With highlight backlight display and acousto-optic alarming, it is easily configured. • The in built temperature compensation makes the meter measure the correct value of oxygen in the environment temperature of -10 ~ 40°C. • As its case is ergonomically designed, it looks elegant, and is easy to carry. ELECTRICAL SPECIFICATIONS : * Measurement display : Displays 4 digit LCD * Measuring range : 0 25% (VOL) * Resolution : 0.1% (VOL) * Measurement error : ±0.5% * Over measurement range display : “OL” * Alarming method : acousto-optic alarming * Working principle of the sensor : source cell sensor * The service life of the sensor : 2 years (it can then be replaced) * Operation temperature: -10 40°C (14~104°F) * Operating humidity : 0~99% RH (relative humidity) * Storing temperature : 0~30°C (32~86°F) * Storing humidity : 20%~80% RH(relative humidity) * Power supply : 3x1.5VAAA alkaline batteries * Batteries service life : about 100 hours of continuous use (when the backlight is off). * Dimension : 172 x 51 x 26 (mm) * Weight : approx. 80gms. APPLICATION : · Oxygen manufacturing factory. · Petroleum refining and petrochemical plants. · Oxygen content detecting in trains and automobiles · Oxygen content detecting in mines. · Oxygen content detecting during mountain climbing and in sealed places. · Other Industries and plants using oxygen. TIPS ABOUT OXYGEN : Oxygen Content (VOL) Explanation 21% Oxygen content in the normal air environment 18% The minimum value of oxygen content as per the safety and hygiene standards 14%---18% Person breathes quicker and deeper and limbs cannot be Moved properly 10%---14% Person may be tired and lose attention 6%---10% Person may be dizzy, nauseas, lose consciousness and go into a coma Less than 6% Person may stop breathing and die

INR 19750 INR 19750

Availability:True

Pay mode:COD only

view details
KUSAM-MECO DIGITAL TACHOMETER INR   3950 INR  3950
-0%

KUSAM-MECO DIGITAL TACHOMETER

MODEL NO. KM-2241,KM-2234BL,KM-2235B MODEL NO. ITEMS PRICE KM-2235B Digital Tachometer (Contact Type) 5 – 9999 / 19,999 RPM 2,925.00 KM-2234BL Digital Tachometer (Non- Contact Type) 5-9999 / 99,999RPM 2,650.00 KM-2241 Non Contact( Photo) Tachometer 2.5 - 99,999RPM & Contact Tachometer 0.5-19,999 RPM, Surface Speed 0.05-1,999.9M/Min. 3,950.00 FEATURES Digital Tachometer uses latest technology for accurate measurements. It has Exclusive one chip of Microcomputer LSI Circuit, It is housed in tough ABS case & has ergonomic design for easy holding in the hand

INR 3950 INR 3950

Availability:True

Pay mode:COD only

view details
1
false