http://WWW.LUTRONMETER.COM
INSTRUMENTSZONE 571b78d19ec66f109851c64a False 166 1273
OK
background image not found
Found results for
'ground faults'
Amprobe CT-100 Wire Tracer INR   67500 INR  67500
-0%

Amprobe CT-100 Wire Tracer

FEATURE CT-100 Traces energized wires without power interruption. Locates breakers without power interruption. 9 V → 300 V AC/DC 9 V → 300 V AC/DC Traces unenergized wires (wire continuity and wire grounded at the end). Pinpoints shorts and ground faults. T-100 Transmitter & 9 V batteries Digital filter to assure cutting edge accuracy in noisy industrial environments. - Sensitivity settings 3

INR 67500 INR 67500

Availability:True

Pay mode:COD only

view details
Amprobe CO2-200 Wall-Mounted CO2 Meter INR   35500 INR  35500
-0%

Amprobe CO2-200 Wall-Mounted CO2 Meter

Model No. CO2-200 Super-large LCD display with CO2 reading CO2 measurement up to 9999 ppm, temperature, relative humidity, dew point and wet bulb Super-large LCD display with CO2 reading High performance low drift sensor designed with NDIR (non-dispersive infrared) waveguide technology with automatic background calibration Audible alarm threshold setting to setup warning against carbon dioxide level with output drive relay to control air flow system Optional PC download capabilities (USB interface) data hold Recording of maximum, minimum and average values with recall function Meter, manual, power adapter 100-240V AC

INR 35500 INR 35500

Availability:True

Pay mode:COD only

view details
Amprobe RLD-1 Refrigerant Leak Detector INR   34100 INR  34100
-0%

Amprobe RLD-1 Refrigerant Leak Detector

MODEL NO. RLD-1 FEATURE Precisely pinpoints a place of the leaks of the refrigerant in air-conditioning systems Sensor detects halogenated refrigerants such as R-134a, R-404A, R-407C, R-410A, R-22, Freon, etc. Suction pump provides instant response and quick sensor clearing, which speeds up the leak detection process Cutting edge accuracy with microprocessor controlled semiconductor gas sensor and advanced digital signal processing Clear leak indication with audio and tri-color visual LED display High-medium-low leak sensitivity selector Low battery indication Carrying case included 15.5 (40 CM) flexible stainless probe Reference leak source included Ambient concentration reset Long-life, DC brushless fan Automatic zero and background compensation Alkaline batteries (2C size) X 2 pcs, User manual, leak check bottle, carrying case, AC adapter

INR 34100 INR 34100

Availability:True

Pay mode:COD only

view details
Amprobe DM73C Pen Probe Digital Multimeter with Built-in Test Probe INR   8300 INR  8300
-0%

Amprobe DM73C Pen Probe Digital Multimeter with Built-in Test Probe

MODEL NO. DM73C FEATURE 600 V AC and 600 V DC ranges Improved DC basic accuracy 0.5% Resistance to 34 MΩ Continuity beeper 3400-count digital display plus analog bargraph Auto power off UL 3111-1 listed Includes alligator clip,ground test lead, spare probe tip and installed batteries 3 3⁄4-digit LCD display

INR 8300 INR 8300

Availability:True

Pay mode:COD only

view details
FLUKE TLK281 SUREGRIPTM AUTOMOTIVE TEST LEAD KIT INR   16500 INR  16500
-0%

FLUKE TLK281 SUREGRIPTM AUTOMOTIVE TEST LEAD KIT

MODEL NO. TLK-281 Complete set of test and measurement accessories designed especially for automotive specialists. Use the sharp stainless steel probes to contact the wire conductor or pinpoint tests on a circuit or relay, and the large jaw alligator clips to get a good ground on the engine or to connect to the battery terminals. An extra long set of alligator clips easily grip to the alternator BAT terminal or the S terminals. The set comes with silicone test leads and a case to keep it organized.Tested to 60 V D

INR 16500 INR 16500

Availability:True

Pay mode:COD only

view details
Fluke TP81 Insulation Piercing Clip Set INR   6600 INR  6600
-0%

Fluke TP81 Insulation Piercing Clip Set

MODEL NO. TP-81 Stainless steel probe pierces insulation on 14, 16 and 18 gauge wire. You control needle depth to minimize insulation damage. Essential for use under hood or under dash. Use it on fuel injectors or sensors while providing complete insulation to grounding due to design. The Fluke TP81 connects to banana jack leads (such as Fluke’s TL224). FEATURE · Banana jack accepts all DMM and banana jack leads · Non-rotating banana jack prevents leads from tangling, allowing you to tighten/loosen clamp while still connected to the test lead · For use with test leads with 4 mm banana plugs · Tested to 60 V DC

INR 6600 INR 6600

Availability:True

Pay mode:COD only

view details
KUSAM-MECO 276HD HIGH VOLTAGE DETECTOR INR   12275 INR  12275
-0%

KUSAM-MECO 276HD HIGH VOLTAGE DETECTOR

MODEL NO. 276HD SPECIAL FEATURES : • Telescopic, Compact, light-weight • Light weight easy to use and handy. • High-voltage detection : The equipment, whether in stretched state is available for voltage detection in high-tension circuits (3.3kV, 6.6kV & 24KV) whether the wires involved are naked or insulated. •Low Voltage detection : The equipment can be used for voltage detection in low-tension circuits (80V ~ 600V) by holding the nameplate portion of the detecting head. Before-use check can easily be done by plugging in an AC 100V plug socket, without using a tester. •Easy to recognize indication : Intermittent lighting in red of a high intensity light-emitting diode and intermittent audible sound of an electronic buzzer are readily recognizable at a full daylight, noisy location. • Water proof : The detecting head, being tightly enclosed, is free from any trouble due to dust, dirt, water. RATINGS AND SPECIFICATIONS : * Working Voltage Range : H.V. : 3kV ~ 24kV AC hold grip portion to detect. L.V. : 80kV ~ 600kV AC hold nameplate portion to detect. * Frequency : 50 Hz / 60Hz * Operation Test : (Initial Voltage) (a) When stretched, hold the grip portion. Put the sensing tip in contact with the voltage : 250V AC ± 50V the LED and buzzer should work. (b) When retracted, hold the nameplate portion. Put the sensing tip in contact with the voltage : 80V AC or below the LED and buzzer should work. * Operation start distance : Distance at which operation starts when front metal is brought near f5mm O. C. Wire with grip portion held by hand. Where 24 kV / f 3mm (voltage to ground) @ 20 cm Where 6.6 kV / f 3mm (voltage to ground) @ 3 cm Where 3.3 kV / f 3mm (voltage to ground) @ 1 cm * Dielectric Strength : (a) Between Sensing tip ~ Grip portion : 50kV AC, 1 min(The detector has to be stretched) (b) Between Sensing tip ~ Nameplate portion : 4kV AC, 1 min. * Construction : Waterproof (detecting head impervious to water). * Insulation resistance : Measure the insulation resistance with the high voltage insulation tester. The areas we measure are the same as Dielectric strength test. (a) Between Sensing tip ~ Grip portion : 1kV (The detector has to be stretched) The insulation resistance has to be more than 2000MΩ. (b) Between Sensing tip ~ Nameplate portion : 1 kV The insulation resistance has to be more than 2000MΩ. * Leakage Current Test : Put high voltage on the parts listed below. (a) Between Sensing tip ~ Grip portion : 50kV AC, 1 min(The detector has to be stretched) The leakage current has to be 100µA or less than 100µA. (b) Between Sensing tip ~ Nameplate portion : 4kV AC, 1 min. The leakage current has to be 100mA or less than 100µA. * Working Temperature Range : -10°C ~ +50°C * Battery : 2 button-cells LR44 (1.5V) * Dimension : 354mm to 1005mm length * Weight : Approx. 185g. ACCESSORIES : • Instruction manual & Carrying Case. SAFETY : • Meets EN61010-1 EN50081-1 EN55082-1 EN55022 EN61000-4-2 EN61000-4-3

INR 12275 INR 12275

Availability:True

Pay mode:COD only

view details
KUSAM-MECO 290HD HIGH VOLTAGE DETECTOR INR   17650 INR  17650
-0%

KUSAM-MECO 290HD HIGH VOLTAGE DETECTOR

MODEL NO. 290HD The detector detects high and extra high voltage in AC lines. An elongated insulated rod permits checking of high tension circuits at safe distance for live voltage. Also it is telescopic compact, light-weight, easy to use and handy. SPECIAL FEATURES : Telescopic, Compact, light-weight, Easy to use. High-voltage detection in high tension circuits. Easy to recognize indications Intermittent lighting in RED of a high intensity light emitting diode and intermittent audible sound of an electronic buzzer are easy recognizable in full daylight, noisy location. Water proof The detecting head, being tightly enclosed, is free from any trouble due to dust, water. GENERAL SPECIFICATIONS : Display : Light : Flashing red light; Sound : intermittent sound 50dB apart 3m. Overall length : Model 230HD : Retracted : 893 ± 50mm ; Extracted : 1520 ± 50mm. Model 290HD : Retracted :1370 ± 50mm ; Extracted : 2450 ± 50mm. Operating Temperature : -10°C ~ 50°C Storage Temperature : -20°C ~ 60°C Construction : Water proof (detecting head impervious to water) Battery : 2 button cells Lr44 (1.5V) Weight : Model 230HD-Approx. 485g. Model 290HD - Approx. 590g.(including Battery) SAFETY : ACCESSORIES : IEC / EN61243-1, 60068-2-6, 60068-2-32, 60068-2-14 Water proof (detecting head impervious to water) Instruction manual & Carrying Case. ELECTRICAL SPECIFICATIONS : 230HD / 290HD Measuring Voltage range Model 230HD - 6kV ~ 36.5kV Model 290HD - 6kV ~ 81.5kV Operating start Voltage (to ground) 2.7kV Frequency 50/60Hz Withstand Voltage (On insulating rod) 100kV / 300mm : 5 minutes Insulation Resistance 2000MW min by 1kV / DC megger at the same testing location as withstand voltage Leakage Current ≤100mA at withstand voltage test Distance & Voltage Chart for 230HD / 290HD 230HD 290HD Distance Voltage Distance Voltage 10 cm 36 KV 48 cm 81.5 KV 5 cm 25 KV 28 cm 60 KV 2 cm 15 KV 8 cm 30 KV Upto 11KV By contact method Upto 11KV By contact method

INR 17650 INR 17650

Availability:True

Pay mode:COD only

view details
1
false