http://WWW.LUTRONMETER.COM
INSTRUMENTSZONE 571b78d19ec66f109851c64a False 166 1273
OK
background image not found
Found results for
'sensitivity settings'
Amprobe CT-100 Wire Tracer INR   67500 INR  67500
-0%

Amprobe CT-100 Wire Tracer

FEATURE CT-100 Traces energized wires without power interruption. Locates breakers without power interruption. 9 V → 300 V AC/DC 9 V → 300 V AC/DC Traces unenergized wires (wire continuity and wire grounded at the end). Pinpoints shorts and ground faults. T-100 Transmitter & 9 V batteries Digital filter to assure cutting edge accuracy in noisy industrial environments. - Sensitivity settings 3

INR 67500 INR 67500

Availability:True

Pay mode:COD only

view details
Amprobe BT-120 Circuit Breaker Tracer INR   4000 INR  4000
-0%

Amprobe BT-120 Circuit Breaker Tracer

Model No. BT-120 Features:- Identifies 120V circuit breakers Adjusts sensitivity automatically Microprocessor controlled Quick and easy to use Extremely accurate readings (always finds the right breaker) Durable and dependable

INR 4000 INR 4000

Availability:True

Pay mode:COD only

view details
Amprobe BT-250 Circuit Breaker Tester INR   13100 INR  13100
-0%

Amprobe BT-250 Circuit Breaker Tester

Model No. BT-250 FEATURES:- Identifies circuit breaker location Works on all electrical systems from 90 to 250V AC Perfect for office, residential and HVAC applications Automatic sensitivity adjustment Quick and easy to use Extremely accurate reading always finds the right breaker Durable and dependable

INR 13100 INR 13100

Availability:True

Pay mode:COD only

view details
Amprobe SM-20-A Sound Meter INR   47200 INR  47200
-0%

Amprobe SM-20-A Sound Meter

Model No. SM-20A FEATURES :- Designed to meet the measurement requirements of safety engineers, health, industrial safety offices and quality control in various environments. A and C weightings for checking compliance with safety regulations as well as acoustic analysis Measuring ranges: A weighting 30~130dB, C weighting 35~130dB Frequency range: 31.5Hz~8KHz Display with 0.1dB steps on a 4 digit LCD Slow (1 sec) and fast (125ms) response settings to check peak and average noise levels Max/min recording Internal memory, 14,000 records Recording intervals from 1 second to 8 hours PC computer download capabilities Data hold to freeze reading on digital display CE, designed to meet IEC651 type 2, ANSI S1.4 type 2

INR 47200 INR 47200

Availability:True

Pay mode:COD only

view details
Amprobe RLD-1 Refrigerant Leak Detector INR   34100 INR  34100
-0%

Amprobe RLD-1 Refrigerant Leak Detector

MODEL NO. RLD-1 FEATURE Precisely pinpoints a place of the leaks of the refrigerant in air-conditioning systems Sensor detects halogenated refrigerants such as R-134a, R-404A, R-407C, R-410A, R-22, Freon, etc. Suction pump provides instant response and quick sensor clearing, which speeds up the leak detection process Cutting edge accuracy with microprocessor controlled semiconductor gas sensor and advanced digital signal processing Clear leak indication with audio and tri-color visual LED display High-medium-low leak sensitivity selector Low battery indication Carrying case included 15.5 (40 CM) flexible stainless probe Reference leak source included Ambient concentration reset Long-life, DC brushless fan Automatic zero and background compensation Alkaline batteries (2C size) X 2 pcs, User manual, leak check bottle, carrying case, AC adapter

INR 34100 INR 34100

Availability:True

Pay mode:COD only

view details
FLUKE I30 AC/DC CURRENT CLAMP INR   54300 INR  54300
-0%

FLUKE I30 AC/DC CURRENT CLAMP

MODEL NO. i-30 The i30 current clamp is based on Hall Effect technology for use in measurement of both DC and AC current. The i30 may be used in conjunction with multimeters, recorders and other suitable recording instruments for accurate non-intrusive current measurement. Electrical Specifications Specified current range 30 mA to 30 A DC, 30 mA to 20 A AC rms Usable current range 5 mA to 30 A DC, 30 mA to 20 A AC rms Crest Factor 1.4 in Output sensitivity 100 mV/A Accuracy (at +25°C) ±1% of reading ±2 mA Resolution ±1 mA Load impedance > 10 k Ohms and ≤ 100pF Conductor position sensitivity ±1% relative to center reading Frequency range DC to 20 kHz (-0.5 dB) Temperature coefficient ±0.01% of reading/°C Power supply 9 V Alkaline, MN1604/PP3, 30 hours, low battery indicator Working voltage (see Safety Standards section) 300 V AC rms or DC General Specifications Maximum conductor size 19 mm diameter Output connection 4 mm safety connector Output zero Manual adjust via thumbwheel Cable length 1.5 meters Operating temperature range 0°C to +50°C Storage temperature range (with battery removed) -20°C to +85°C Operating humidity 15% to 85% (non-condensing) Weight 250 g Safety standards BS EN 61010-1:2001 BS EN 61010-2-032:2002 BS EN 61010-031:2002 300 V rms, Category III, Pollution Degree 2 Use of the probe on uninsulated conductors is limited to 300 V AC rms or DC and frequencies below 1 kHz EMC Standards EN 61326: 1998 +A1, A2, and A3

INR 54300 INR 54300

Availability:True

Pay mode:COD only

view details
FLUKE I50S, AC SCOPE CURRENT PROBE, 50MHZ INR   302200 INR  302200
-0%

FLUKE I50S, AC SCOPE CURRENT PROBE, 50MHZ

MODEL NO. i-50S · Designed for use with bench oscilloscopes, the i50s Current Probe offers an ergonomic, robust and high performing solution for the measurement of DC and AC currents up to 50 MHz. With a permanent nominal current of 30 A RMS and a measuring capacity of 50 A for 10 s, as well as exceptional immunity to high common mode voltages (dv/dt = 5 kV/_s,) amplitude = 1,5 kV, error < 0,05% of IPN), the i50s considerably widens the possibilities of accurate measurement of commutation currents. Bandwidth DC up to 50 MHz Nominal current 30 A Max. current 50 A, < 10 s Automatic zero adjustment and degauss functions Overheating and head unlocked warning Rise time < 7 ns External magnetic field rejection rate AC and DC 60 dB Rejection rate of fast dv/dt (5kV/_s) < 15 mA t Electrical Characteristics Nominal current (In) ± 30 A DC or A rms Measuring range (duration < 10 s) I max ±50 A pk Output sensitivity low range 1 V/A (1 MΩ) High range 100 mV/A (1 MΩ) Overall accuracy (DC to 100 Hz at 25°C ±0.5% at In typical ±1.5% at I max Gain variation (max) ±0.04% of rdg / °C Step response in Data Sheet Frequency response in Data Sheet Insertion impedance (ZI) in Data Sheet < 0.1 Ω up to 10 MHz < 0.4 Ω 10 MHz to 50 MHz External magnetic field rejection rate 60 dB (AC and DC) Rejection rate of fast dV/dt at 5 kV/ μs < 15 m At (during dV/dt) Output noise level (measured with a filter at 25 MHz) 1 m At rms typical Output noise level (measured with a filter at 25 MHz) 9 mA tpp Dynamic Characteristics Bandwidth DC to 50 MHz(-3dB) Frequency derating (see Figure 4) 10 A at 10 MHz Rise time, (10% to 90%) < 7 ns Delay time < 25 ns Overshoot < 5% of reading General Characteristics Aperture dimensions 5 x 5 mm (0.2 in x 0.2 in) Max primary conductor temp 60° C (140°F) Dielectric withstand 1350 Vrms / 50 Hz / 1 min Working voltage 300 Vrms or DC (CAT I) 150 Vrms or DC (CAT II) Operating temperature °C to + 40°C (32°F to 104°F) Storage temperature -10°C to + 60°C (14°F to 140°F) Maximum altitude 2000 m (6600 ft) Maximum relative humidity 80% , 31°C (87°F) Environment Indoor use only Power supply ±12 V ± 0.5 V Current consumptions at nominal 30 A 550 mA Current consumption during demagnetization 1.3 A (for 6 s) Probe Output cable length 2 m (6.6 ft)

INR 302200 INR 302200

Availability:True

Pay mode:COD only

view details
Fluke LVD1 Volt Light INR   2900 INR  2900
-0%

Fluke LVD1 Volt Light

Model Name Description Fluke LVD1 Fluke LVD1 Volt Light Non-contact AC voltage detector and LED flashlight combined in one convenient, compact design. With exclusive dual-sensitivity. The voltage detector glows blue when it's near AC voltage, and glows red when it's at the source. Detects voltages from 40 V AC to 300 V AC. Voltage detector glows blue 50 Hz - 60 Hz or 2.5 - 38 cm (1 - 5 in) away from source. Operating temperature 0°C to 50°C. Ultra-bright white LED with 100,000 hour bulb life. AAA battery included.

INR 2900 INR 2900

Availability:True

Pay mode:COD only

view details
1
false